Page 1 of 1
Two default gateways
Posted:
Fri Mar 06, 2015 12:58 amby jkidd
I have a client using a SIM gateway and wants to add another SIP gateway, so two telco providers on once box
Roughly what do l I need to do to allow both gateways to be used?
VERSION: 2.8-436a
BUILD: 140425-0906
Asterisk 1.8.23.0-vici
Suse 4.2.42(1)
Re: Two default gateways
Posted:
Fri Mar 06, 2015 10:47 pmby darkeye08
Are the gateway can be connected through SIP? If yes, then you can just create two new SIP connection from Carriers with the details of your Gateway.
Then from there you can add dialplan it which calls will be routed to the Gateway you wanted to use. Cheers!
Re: Two default gateways
Posted:
Sat Mar 07, 2015 8:50 pmby jkidd
Thanks Darkeye08 - Just to check, how would I define the gateway being used in Carriers?
Re: Two default gateways
Posted:
Sat Mar 07, 2015 9:42 pmby darkeye08
Hi, Once you created SIP details with dialplan in the Carriers you just need to Activate it. Then you can test call matching the dialplan you input.
Re: Two default gateways
Posted:
Sat Mar 07, 2015 11:07 pmby jkidd
I actually mean two routers, two different gateway internet providers. Any idea how to connect both to one vicibox?
Re: Two default gateways
Posted:
Wed Mar 18, 2015 3:56 pmby chasejordan1
You could try a load balancing router or a bonded routed / service.
Re: Two default gateways
Posted:
Mon May 18, 2015 3:23 amby jkidd
Thanks, project coming up soon, so will look at this option!
Re: Two default gateways
Posted:
Tue Jun 02, 2015 4:01 amby jkidd
Seems like the easiest solution for this was setting up static routes where it's directing traffic to either router based on the IP it's looking for (IP = SIP provider)
--article on adding static routes if you use go auto dial, vicidial is much the same--
https://access.redhat.com/documentation ... outes.html